Identify a copper THHN/THWN-2 surplus reel by actual type and manufacturer dimensions.

Checkable specification fields
These are examples from the named references, not assertions about a reel you have not shown us. Match the actual jacket, tag and part number before using a product claim.
| Field | Documented example / boundary | Source |
|---|---|---|
| Southwire SIMpull example | SPEC10000 describes copper, PVC insulation, a nylon sheath and a 600 V THHN/THWN-2 product family; confirm the exact print on your reel. | [1] |
| Cerrowire example | Cerrowire describes a copper 600 V THHN/THWN-2 family; its SLiPWire technology applies to stated 8 AWG–1000 kcmil sizes, not to every reel. | [2] |
| Encore Wire example | Encore lists a copper THHN/MTW/THWN-2/T90 family from 14 AWG to 1000 kcmil and sequential footage marks at 250 kcmil and larger. | [3] |
| 500 kcmil Southwire reference | For this specific table, nominal copper is 1,543 lb/1,000 ft and nominal complete-cable weight is 1,662 lb/1,000 ft; neither is the weight of an unknown partial reel. | [1] |
| Listing evidence | UL says the complete Listing Mark is on a reel tag, flange, coil or smallest container; a cable-surface UL print alone is supplemental. | [4] |
Compare the exact manufacturer family before assigning a model
Southwire SIMpull, Cerrowire SLiPWire and Encore Wire SuperSlick Elite are different makers and product descriptions, not three interchangeable model numbers. Start with the printed manufacturer and full type string, then compare the size, conductor material and any part number to the matching official source. A color or a photo of a similar reel does not establish its brand or SKU.
- Transcribe the maker and complete THHN/THWN-2 legend as printed; preserve any other type letters and voltage wording.
- Record conductor material, AWG/kcmil, color, part or catalog number, and legible sequential footage marks.
- Treat a missing or conflicting tag as an unresolved identification question, not an assumed brand match.
Use nominal weight only as a cross-check
The cited Southwire table separates conductor diameter, outside diameter, copper mass and complete-cable mass. Its 500 kcmil copper number is not the shipping weight of an insulated partial reel. Do not transfer Southwire dimensions or allowances to Cerrowire, Encore or an unknown construction.
- Match the exact manufacturer product sheet and size before using a reference measurement.
- Keep original labeled put-up and currently measured remaining footage in separate fields.
- If length is estimated, say how and when the estimate was made.
Take five useful views of the offered lot
An overall picture provides storage and reel context, but not product identity. Pair it with sharp close-ups of the full reel tag, repeating jacket or insulation print, both cable ends, and any cut, scrape or broken flange. The owner-inventory photograph below is only a general example; it is not a photograph of any of the three cited products.
- Include a scale or legible tag where possible; never guess gauge from color.
- Show start and end sequence marks or another stated length method on partial reels.
- Include a safely disconnected end view only; no energized-cable handling instructions are provided.
Separate identity from present condition
A factory specification describes a product as made, not a surplus reel after storage or handling. Report visible scrapes, flattening, corrosion, open ends and missing labels as observations. Do not claim testing, current listing or installation fitness from a picture.
- State storage history and whether original protective wrapping is intact, if known.
- Use the exact-product spec sheet and flag unmatched or incomplete manufacturer records as unverified.
Questions about this reel
Does the word THHN alone confirm a wet-location rating?
No. Read the entire type and manufacturer print. The referenced Southwire THHN/THWN-2 product distinguishes THHN dry from THWN-2 wet/dry claims; verify the exact offered reel and leave installation suitability to a qualified buyer.
Does a UL symbol printed on the conductor prove this reel is Listed?
No. UL describes the full mark on the reel tag, flange, coil or smallest container as the evidence for that unit; a surface-printed UL symbol is supplemental. If the complete label is missing, say that the listing evidence is unverified.
Can a photo of a similar brand reel establish the model or remaining footage?
No. Photograph the actual maker print, tag, size, ends and length marks. An official family sheet explains a design but cannot establish the identity, condition or measured footage of a different physical reel.
Source notes and scope
The linked references support the specific examples above. Product designs and standards can change; seller-supplied markings, measured length and current condition require separate verification. Nothing here states that this buyer stocks, tests, guarantees or accepts a particular cable, or offers installation advice.